6 Common Problems with New Holland Tc33d and Their Fixes

Key Points:

  • Engine start problems, overheating of the engine, hydraulic issues, and glow plug failure are the most common problems with New Holland Tc33d tractors. 
  • Some other problems you can also face include transmission issues, broken frames, and white smoke from the vent.
  • Some of these problems can be troubleshot on your own while some need professional help.

New Holland is a popular tractor brand. It has been in the market for a long time. So they have built their brand and trust. All of their models are reliable and don’t face that many issues. Tc33d compact utility tractor is no exception. Since 1999, it has been doing great. 

However, just like other machines, it’s common to grow some problems with time for this tractor also. Some issues are – starting problems, hydrostatic issues, engine overheating issues, glow plug failure, and others. 

This article describes 6 most common New Holland Tc33d problems with New Holland Tc33d tractor. I’ll also tell you how to troubleshoot this problem.

6 Common Problems with New Holland Tc33d and Possible Solutions:

These are some of the most common New Holland Tc33d problems, and some general ideas are shown about how these problems can normally be dealt with.

1. Tractor Engine Doesn’t Start or Starting Difficulties 

This is the most common problem that most of the users face with any model of New Holland tractors. You may face problems while starting the tractor or the tractor may not start at all.

A number of things can cause this problem. The very first reason can be the battery. Inspect the battery terminals, cables, and the whole battery using a load tester. If you haven’t got a load tester, see the nearby auto parts store. Change the battery if it is faulty. 

It can also occur if the power take-off light is defective or the fuse is blown. Repair the light and replace the fuse if they cause a problem.

If the engine turns over but can’t get enough power to start, the problem can be related to fuel. Check if the fuel filters are clogged. When the fuel lines get clogged, the diesel can’t reach the tank. Consequentially, the engine doesn’t receive enough power to run. Clean the fuel filter or replace it. 

The other possible reasons include voltage dropping due to a faulty glow plug relay or starter problem. Try adding a new glow plug replay or an extra relay to the starter. Contact your local dealer if it still doesn’t get fixed.

2. Engine Overheating Problem

Engine overheating problem is connected to the cooling system failure. It happens when there is a problem with the radiator problem or the coolant you use.

So let’s start with the radiator. Open the radiator cap and make sure the radiator has coolant in it. Also, change the coolant if it’s not in good condition. Here is a warning. Never open the radiator cap when the engine is heated. And never fill the coolant with tap water as it contains a lot of minerals.

Now coming to the radiator fin, it can get muddy and blocked. As a result, your engine won’t cool. To clean it, blow the fin off with compressed air.

If your radiator fan and the coolant is working well, you should not face problem overheating problem anymore. But there are some other reasons that can cause it. If that’s the case you should see a professional mechanic.

3. Hydraulic Issues

Hydraulic issues are quite common with New Holland Tc33d. There can be several problems regarding the hydraulic pump. One of them is the leaking of hydraulic fluid. Mostly it happens because of a worn-out filter. Replace the seal and the filter should solve this problem.

Another problem is the overheating of the hydraulic. Check the oil level and fill it to the recommended level if it is not. Also, old and improper oil can cause the hydraulic to overheat. Fill the system with the new recommended oil if that’s the case.

If you find hydraulic oil in the engine, the shaft sensor might be the reason here. Replace the shaft sensor to fix the problem.

4. Glow Plugs Failure

Glow plugs failure is another common problem with new holland tractors. In most cases shorted plug or faulty temperature sensors are the reason behind this problem. You need to detect the shorted plug. For this, test the plugs with an amp-meter. Also, don’t forget to replace the temperature sensor. 

5. Broken Frame

This is not that common with this model of New Holland. But you should know it. If the casting becomes defective, the tractor frame can get broken. You should see a technician if you ever face this.

6. Transmission Issues

You can also face issues with power and transmission. Moat transmission issues are due to fuel and lubricant anomalies. Use the right fuel and lubricate the components of your tractor. It should fix this problem.

Also, check the fuel filter for clogging issues. If it still doesn’t get solved, you will need professional advice. 

What Majority of the Users Feel About New Holland Tc33d?

 After seeing the opinions of different users in the tractor forums, we can conclude that New Holland Tc33d is quite a relatable tractor. New Holland is a good brand and you can easily trust them. Besides, most of the users were satisfied with this model. The shape, specs are great and it usually doesn’t have any issues.

However, whether it will be a good one for you or not depends on your preferences. Again, with proper maintenance, most tractors will do good and last for a long time. So the maintenance is a key part here.

Final Thoughts

I’ve discussed the most common problems that the users faced with this tractor and their solution. Still, you can face some other problems such as white smoke coming out, etc. If you face such problems, you can ask in the user forums or take help from a professional.

However, as you’ve seen most of these problems have their roots in the lack of maintenance. So, the regular maintenance is crucial. If you maintain the tractor on a regular basis, you’ll be able to avoid most of these problems and give a long lifetime to the tractor.

Related Posts: