The Key Differences Between John Deere X384 vs X394

It is nothing new that John Deere always offers such models that make consumers confused choosing one over another. John Deere X384 and X394 are such models that come up with very similar features.

The John Deere iTorque power system, which combines engine features with a unique hood design to deliver improved pulling. Moreover, both models come with a standard four-year or 300-hour bumper-to-bumper warranty. Then where is the difference between these two fantastic models?

I’ll portray some slight distinctions and significant characteristics between X384 and X394 throughout this article so you can decide which is ideal for you.

John Deere X384 vs. X394: Quick Comparison Table

Despite sharing many similarities, the John Deere X384 and X394 have notable variations. So, let’s have a look at a quick comparison of these two powerful models.

John Deere X384 Vs. X394:

FeaturesX384X94
Manufacturer and model of engineFR691VFR691V
Power23hp23hp
Width of the blade48 inches48 inches
Forward speed0-5.9 mph0-6.2 mph
Total Length72 inches74 inches
CostLess expensive than X394More expensive

What are the Features of John Deere X384 and X394 Provide that Confuse Consumers?

Engine and Power:

Both the John Deere X384 and X394 come up with a V-twin air-cooled engine that runs smoothly and reliably.

Both the X384 and the X394 are equipped with the John Deere iTorque power system, which combines engine capabilities with a unique hood design to give enhanced pulling ability, even cooling, and durability.

In both models, a flywheel alternator has enough capacity to swiftly recharge the battery and power electrical equipment such as lights or a sprayer, and it is managed to keep the battery at full charge without risk of overcharging.

It’s worth noting that the X384 and 394 both have a large fuel tank and an accessible fuel gauge, which reduces the frequency of fuel stops and the risk of running out of gas.

The fuel tank they provide has a considerable capacity of 12.5 liters, allowing for longer periods of service between refills, and the large-diameter fuel tank refill opening makes supplying fuel simple.

Comfortability:

The 48-inch mower deck is a stamped-steel, wide, flat-top design that gives great cutting quality, profitability, cleanliness, longevity, and flexibility in both the X384 and X394 models.

Even at greater mowing speeds or in tall grass, desired output and clipping dispersion are guaranteed.

The optional lever-action or electric one-touch MulchControlTM system delivers greater mulching productivity and versatility, with a 12.3-cm depth throughout the whole deck shell for excellent mowing, mulching, and bagging performance.

It’s important to keep in mind that both models have deep mower-deck stamping, which results in outstanding cutting quality.

It permits cut and hung material to leave the deck without having to be recut. It avoids resetting, allowing more power being used to mow entering grass, resulting in increased mowing capacity.

Furthermore, in comparison to two-wheel-steering-equipped tractors, both models’ four-wheel steering gives significant agility and trimming benefits.

As a result, the uncut circle diameter is lowered from 21 inches, obviating the need to back up when cutting around trees, shrubs, and other obstacles. Additionally, the outside turning circle is smaller, which saves time and effort required in turning and improves mowing productivity.

Warranty:

In the case of warranty, both John Deere X384 and X394 again share a similarity. These incredible models come with a four-year or 300-hour bumper-to-bumper warranty as standard.

It’s worth mentioning that this fantastic feature is available on all John Deere X300 models. The interesting part is that the warranty is trouble-free, as all paperwork is handled by one corporation.

Cost:

When all the features get matched with one another, in terms of cost John Deere X394 comes up with a higher price than X384.

It can be seen in the comparison table that X394 offers a higher forward speed with 0-6.2mph than X384 and 74 inches in total length.

Whereas X384 shows up with 72 inches in overall length. Because of such reasons, X394 is more expensive than X384.

John Deere X384 Vs. X394: Which One to Choose?

Overall, if all of the features and dependability of John Deere X384 and X394 are compared, X384 should be chosen as the best option for use because it shows up with the same features as X394 at a low price having some other slight differences which can be adjusted.

At a lower price, X384 can provide you with most of the facilities that you will get in X394 at a higher price. It’s also important to note that snow blowing isn’t too difficult on a hydro, however, snow plowing will put the hydro through its paces.

Snowplows and snow blowers are standard on all John Deere X300 series mowers, which is a unique feature.

As a result, the X384 should be chosen over the X394 in order to acquire these facilities at a cheaper cost.

The X384’s tires are really gentle on the ground, but the ride is more similar to that of a garden tractor, which means fewer bumps are felt and the power to mow and climb hills is impressive.

It has been used for some light towing and has shown to be extremely effective.

The cut quality is above average for a 48″ deck, and the blade power is more than adequate. The deck will eat thick grass without sapping the engine’s power.

What are the thoughts of the users on John Deere X384?

Many users claim to have had a number of lawn tractors over the years, all of which did the job, but the overall quality was lacking. They are certain that the John Deere X384 is the best lawn tractor they have ever owned based on their experience.

Regardless matter the area in which it is used, the cut quality is outstanding.

The engine produces an enriched horsepower. Without needing to back up to gain a better angle around what you’re mowing, the four-wheel steer enables effortless movement around obstructions.

Maintenance is also simple and designed to avoid making a mess when changing oil. The performance of the mower with the power flow blower and bagging system has been excellent.

Overall, this lawn tractor is well worth the money and performs admirably.

Summary

Knowing the differences and similarities between the John Deere X384 and X394 can help you make an informed decision about which one to choose for your personal requirements.

With a lower price tag, John Deere X384 is regarded as a trustworthy brand because of its reliability, and as a result, people will draw towards it more frequently.

Furthermore, it is to note that with caster, camber, and axle angles that are designed to save effort, especially when going from straight ahead into a turn, the four-wheel steering system is built for tight turns, resulting in improved mowing performance.

Related Posts: